User:Khamar

From Wikipedia, the free encyclopedia

Kyle Hamar[edit]

Plant Manager[1], Chemist[2], Materials Scientist, Skeptic.

I firmly support the intent of Wikipedia to bring people together on topics and work toward common goals in an open and transparent manner.

Controversy[edit]

I proudly support the work of Guerrilla Skepticism on Wikipedia, where all edits are open and transparent and secondary references are more important than your belief system on any one subject. Editors with similar interest should work together on articles. I do not edit controversial pages. Although I will be happy to help you with any article in my core subject areas - I am unlikely to join in "your cause" on a given controversy. In my opinion this is not the role of a good editor nor the purpose behind Wikipedia. Collaboration on subjects of interest for the improvement of those articles is my choice instead.

Did you know? contributions:[edit]

Steven Novella

New articles[edit]

Important tips and articles[edit]

User:Khamar/FAQ

Did you know? nominations:[edit]

Significant expansions:[edit]

Early work[edit]

Graduate research at Tulane University included laser photo-kinetics of group I elements[3] and semiconductor precursor materials.[4][5][6]

Early career[edit]

  • Supervisor, Texas Instruments Silicon Engineering Technology Center.
  • Supervisor and Manager at Ashland Specialty Chemical.
  • Site Manager for Houghton Fluidcare

Current[edit]

Plant Manager, Kanto Corporation.

Recent professional focus has involved process safety and associated regulations.

29 CFR Department of Labor/Occupational Safety and Health Administration
40 CFR Environmental Protection Agency
49 CFR Department of Transportation/National Transportation Safety Board
State and Local Codes (varies)
National Standards
API American Petroleum Institute
ASHRAE American Society of Heating, Refrigerating and Air Conditioning Engineers
ASME American Society of Mechanical Engineers
NFPA National Fire Protection Association
NIOSH National Institute for Occupational Safety and Health
OSHA Occupational Safety and Health Administration
Recognized and Generally Accepted Good Engineering Practices (REGAGEP)
This may include other code requirements and or good Engineering (best practices) considerations not mentioned above.
All manufacturers’ written instructions, requirements, and recommendations.

Tools I like on WP[edit]

Useful wiki-related pages[edit]

Useful wiki-related templates[edit]

I use this as a scratch area to drop bits of wiki markup. Sometimes this section is blank or sparsely populated...

..

ZAP!No user-serviceable parts inside.
CabalMember of the Secret Cabal.
Community Position
This user was manually confirmed prior to meeting the autoconfirmation requirements. (verify)
Editing Skill WikiMedia Commons
wiki-2This user is an intermediate Wikipedia editor.


Subscriptions[edit]

Tomorrow's featured article

Reverse of the double sovereign
Reverse of the double sovereign

The double sovereign is a gold coin of the United Kingdom with a nominal value of two pounds sterling (£2). It features the reigning monarch on its obverse and, most often, Benedetto Pistrucci's depiction of Saint George and the Dragon on the reverse (pictured). It was rarely issued in the first century and a half after its debut in 1820, usually in a new monarch's coronation year or to mark the institution of a new coinage portrait of the monarch. In addition to the usual coinage in Britain, specimens were struck at Australia's Sydney Mint in 1887 and 1902. Most often struck as a proof coin, the double sovereign has been issued for circulation in only four years, and few examples worn from commercial use are known. It is now a collector and bullion coin, and has been struck by the Royal Mint most years since 1980. In some years, it has not been issued and the Royal Mint instead placed gold versions of the commemorative £2 piece in the annual gold proof sets. (Full article...)


References[edit]

  1. ^ "Kanto Corporation". Kanto Corporation. Retrieved 8 July 2014.
  2. ^ "MS Degrees Awarded". Tulane University. Retrieved 8 July 2014.
  3. ^ Panayotov, Valentin; Hamar, Kyle; Red, Clarence; Birdwhistell, Teresa L. T.; Koplitz, Brent (1998-05-01). "Selective ionization of group I elements from laser ablated plumes of Rb⋅Ga⋅Sb,K3Ga3As4, and K4In4As6". Journal of Applied Physics. 83 (9): 4974–4979. doi:10.1063/1.367300. ISSN 0021-8979.
  4. ^ Panayotov, Valentin G.; Hamar, Kyle; Birdwhistell, Teresa L. T.; Koplitz, Brent D. (1995-01-01). "III-V semiconductor thin films via laser ablation/ionization of I-III-V Zintl-phase materials". 2547: 328–341. doi:10.1117/12.221486. {{cite journal}}: Cite journal requires |journal= (help)
  5. ^ Koplitz, Brent D.; Panayotov, Valentin G.; Hamar, Kyle; Birdwhistell, Kurt; Koplitz, Lynn V.; Birdwhistell, Teresa L. T.; Xu, Xiaodong; Deshmukh, Subhash; Brum, Jeffrey L. (1993-01-01). "Using lasers to understand and control the chemistry of semiconductor-related precursors". 1804: 79–86. doi:10.1117/12.142079. {{cite journal}}: Cite journal requires |journal= (help)
  6. ^ Panayotov, Valentin; Hamar, Kyle; Birdwhistell, Teresa L. T.; Red, Clarence; Dillon, Jennifer; Dennison, David; Barnes, Anthony P.; Koplitz, Brent (1995-04-24). "Selective removal of potassium from K4In4Sb6 via laser ablation/ionization". Applied Physics Letters. 66 (17): 2241–2243. doi:10.1063/1.113179. ISSN 0003-6951.